|Manufacturer||Direct Current Engineering|
The ultimate Off-road protection for your Rivian R1S and R1T is here. Designed and manufactured in the USA, the Direct Current Engineering Rock Sliders are the missing link in ease of access to your Rivian at any ride height setting while protecting your vehicle when going off-road.
All seams between tubes and brackets are fully welded for maximum strength and durability. This makes the entire step (aside from the plates that bolt to the top) one single piece even further increasing it's strength by avoiding bolted connections between separate parts. The sliders for the R1T come in at 62lbs per side, and the R1S weight comes in at 54lbs per side. These have no negative effects on the Rivians range!
Easy To Install
The rock sliders are a fully bolt on solution that require no vehicle modification. Customers will only have to remove the plastic panel on the underside of the truck to bolt the rock sliders on. Both rock slider sets will reuse the OEM hardware found on the underside of the truck. R1T owners will be given a few extra bolts that are required to attach the rock slider brackets to threaded holes found on the underside of the truck that do not already have bolts from the factory.
The main structure of the rock sliders have a high quality textured black powder coat. While the top faces of the steps will have an equaly high quality non-slip textured black finish.
No compromise on Ground Clearence
Our rock sliders will not affect the current ground clearence of either the R1S or the R1T at any ride height. They sit completely flush against the underside of the vehicle.
Dual Mounting Points
Our Rock Sliders are capable of using the factory Rivian mounting points, or simply use our frame to support the vehicle on a lift.
- Designed and manufactured in the USA with the highest quality material
- Uses DOM tubing
- R1T Rock Sliders are 62lbs each
- R1S Rock Sliders are 54lbs each
- Allows for ease of access into the vehicle at any ride height
- Does not compromise ground clearance at any ride height
- Easy to install
- No custom work or cutting required for installation
- Intergrated steel pads for conventional jack use
- High quality textured black powder coat