Audi R8 (Type 42) KW Coilover Kit V4 Bundle

Purchase KW Coilover Kit V4 Bundle | 08-15 R8

SKU: 3A711005
KW Coilover Kit V4 Bundle | 08-15 R8
Power gain Up To
+0 HP

Torque gain Up To
+0 TQ

Advertised gains are estimates of HP and Torque “at the engine” calculated from gains as measured on a Dynojet Dynamometer in ideal conditions and typically show the largest possible change. Actual gains are dependent on the following: Learn More about Crank HP Vs Wheel HP

Model – Manufacturers use the same engine in multiple model vehicles and often times they are in a different state of tune, for example: 2008 C63 and a 2008 CLK Black Series. Both have the same engine, but the C63 has 451hp while the CLK63 has 500hp. Naturally the C63 will show more gains as it starts at a lower level.

Model Year – Similar to above, as time progresses, Manufacturers tend to slightly increase power output via software from one year to the next or offer “Performance Packages” with increased power. The engines remain largely unaltered and as a result, final tuned output remains the same, while the gains are lower as the starting point is now higher.

Fuel – Fuel quality is HIGHLY important with performance vehicles. Low quality and/or low octane fuel will greatly impact engine output and potentially even engine health. Top tier brand premium fuels should always be used to achieve the best results possible.

Drivetrain – All wheel drive has higher drivetrain losses than rear wheel drive. This results in lower numbers when testing on a chassis dyno. Wheel/tire size and weight will also impact chassis dyno results

Weather/Conditions – Temperature, humidity, altitude, and air density all impact engine performance. Heat, high humidity, and thin air will all work towards reducing engine output

Engine Health – Higher miles tends to result in increased build up and lower compression which can and will impact engine output. Properly maintained engines will have better performance than abused or neglected engines.

Supporting modifications – The highest power levels require supporting modifications. Depending on the engine, this could mean forged internals, built transmission, upgraded fuel system, 110+ octane race fuel, etc.
Please confirm:
NOT LEGAL FOR SALE OR USE ON POLLUTION CONTROLLED MOTOR VEHICLES
Learn why

Confirmation
Please confirm that you are not installing this product within the United States.

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some Weistec Engineering performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website. http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. Weistec Engineering holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.
$8,999.00 $8,999.00
QTY:
Install instructions
Prop 65 warning

Warning
This product can expose you to chemicals including carbon black, silica - crystalline, formaldehyde, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product details

Manufacturer	KW Suspensions
UPC	847691074435

Vehicle application

year	make	model	trim	engine
2015	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2015	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
2014	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2014	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
2012	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2012	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
2011	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2011	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
2010	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2010	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
2009	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2009	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
2008	Audi	R8	Spyder (Type 42)	4.2 FSI V8 (CNDA)
2008	Audi	R8	Coupe (Type 42)	4.2 FSI V8 (CNDA)
See more

Instructions

Install instructions

Product Description

KW V4 coilovers are a combination of our innovative, race proven technology, as well as decades of experience tuning high end sports cars, super sedans and exotics such as the Audi R8, Audi RS6, BMW M5, Lamborghini Aventador LP 750-4 SV, Dodge Charger SRT Hellcat, Mercedes AMG GT and more. In addition to the individually adjustable ride height the KW V4 coilover kit allows an independent Adjustment -f the rebound damping as well as the low-speed and high-speed compression damping. Each KW V4 coilover kit is delivered with a vehicle-specific comfort setting and with the integrated Adjustment -controls the damping characteristics can be set quickly and intuitively transformed to an optimized performance setup. The 3-way adjustable high-performance dampers in the KW V4 coilover kits feature independent Adjustment -f the rebound damping utilizing patented TVR-A technology, as well as the low speed and high speed compression damping utilizing TVCLH-A technology. The KW V4 coilovers are based upon successful race technology utilized by multiple overall winners of the ADAC Zurich 24h Nurburgring race. The new KW V4 coilovers are exclusively developed for select high-performance vehicles, which benefit greatly from the KW suspension technology -o improve their driving dynamics.

Application Guide

2008-2015 Audi R8 (42) with magnetic ride V8, all models; (bundle incl. magnetic ride cancellation unit)
2010-2015 Audi R8 (42) with magnetic ride V10, all models (bundle incl. magnetic ride cancellation unit)

Key Features and Benefits

KW suspensions V4 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
Each damper is dyno tested to ensure accuracy and preset to our recommended shock settings before being released for delivery.
Solid aluminum unibal top mounts improve steering feedback by minimizing deflection while providing camber adjustability when applicable.
Road legal motorsports technology featuring independent rebound and low and high-speed compression adjustability with application specific street focused spring rates and matched damper tuning.
TVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.
TVCLH-A (Twin Valve Compression Low High - Adjustable) technology - Patented compression valve allows you to easily fine tune the low speed and high-speed damping and includes suggested settings for both street and track use.

Product Documents

Notes

88: Electronic damping control has to be deactivated. Deactivation kit is included in the delivery.
67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.
90: Aluminium suspensions struts
1: Height adjustable on the front and rear axles (threaded strut housings)

Lower Rates

Front: 0.2-1.0"
Rear: 0.2-1.0"

KW Coilover Kit V4 Bundle | 08-15 R8

Power gain Up To

Torque gain Up To